Stability analysis of semi-trimaran flat hull ship for a sea transportation model

Main Article Content

Gerry Liston Putra
Hadi Tresno Wibowo
Fendra Agusta

Abstract

Indonesia as an archipelagic nation highly requires a model of sea transportation as interconnection mainframe between islands. An effective and efficient use of sea transportation is the main factor to improve Indonesian economy. Therefore, it is necessary to optimize the sea transportation model that services throughout Indonesian sea. It has been known that an alternative solution to this specific need is the use of Semi Trimaran Flat Hull Ship. The main supporting reason is the good stability feature owned by this ship design. The focal point of this research is to evaluate the stability test using inclining method according to international standard. Maximum righting lever (GZ) obtained is 4.59 cm for the model size or 1.377 m for the original size in 57.3 degrees. The value is greater than 25 degrees as a standard value. Thus, the result of ship stability analysis shows that semi-trimaran Flat Hull Ship has complied with all IMO (International Maritime Organization) criteria. All of these results indicate that this ship has good stability feature and fit to be continued in a physical testing.

Downloads

Download data is not yet available.

Article Details

How to Cite
Putra, G. L., Wibowo, H. T., & Agusta, F. (2017). Stability analysis of semi-trimaran flat hull ship for a sea transportation model. Communications in Science and Technology, 2(2). https://doi.org/10.21924/cst.2.2.2017.52
Section
Articles
Author Biography

Gerry Liston Putra, Universitas Indonesia

Mechanical Engineering Department, Universitas Indonesia

References

1. T.W. Astiti, Revitalisasi armada pelayaran rakyat dengan menggunakan kapal baja lambung pelat datar, Undergraduate Thesis, Universitas Indonesia, Indonesia, 2015.

2. I. Bačkalov, G. Bulian, J. Cichowicz, E. Eliopoulou, D. Konovessis, J.F. Leguen, et al., Ship stability, dynamics and safety: status and perspectives from a review of recent STAB conferences and ISSW events, Ocean Engineering. 116 (2016) 312-349.

3. M.A.S. Neves, Dynamic stability of ships in regular and irregular seas- an overview, Ocean Engineering. 120 (2016) 362-370.

4. E. Daniswara, Analisis karakteristik kapal model pelat datar axe bow semi-trimaran dan buritan reverse duck-tail dengan uji kecepatan berbasis remote control, Undergraduate Thesis, Universitas Indonesia, Indonesia, 2015.

5. F.A. Ayub, Perancangan alat uji inclining test berbasis IACS standard, Undergraduate Thesis, Universitas Indonesia, Indonesia, 2015.

6. A.M. Reed, A naval perspective on ship stability, 10th International Conference on Stability of Ships and Ocean Vehicles, Saint Petersburg, Russia, 2009, pp. 21–44.

7. J. King, Origins of the theory of ship stability, Transactions The Royal Institution of Naval Architects. 140 (1998) 222–238.

8. Marcus A.T. Prinsip merancang kapal. Depok, Indonesia : Teknik Perkapalan Universitas Indonesia, 2014.

9. C.B. Barrass, D.R. Derrett. Ship stability for masters and mates. Oxford, UK : Butterworth Heinemann, 2006.

10. L.G. Taylor. The principles of ship stability. Glasgow, UK : Brown, Son & Ferguson, 1968.

11. M.D. Woodward, M.V. Rijsbergen, K.W. Hutchinson, and A. Scott, Uncertainty analysis procedure for the ship inclining experiment, Ocean Engineering. 114 (2016) 79-86.

12. A. Francescutto, Intact stability criteria of ships – past, present and future, Ocean Engineering. 120 (2016) 312-317.

13. IMO. Resolution MSC.267(85)-adoption of the international code on intact stability. London, UK : IMO Publishing, 2008.

14. F.K. Barnes, On a new method of calculating the statical and dynamical stabilities of a ship, Transactions - Society of Naval Architects. 2 (1861) 163–179.

15. W. Peters, V. Belenky, C. Bassler, K. Spyrou, N. Umeda, G. Bulian, et al., The second generation intact stability criteria: an overview of development, Transactions - Society of Naval Architects and Marine Engineers. 119 (2011) 225–264.